Info: 'You have changed the initiator ID of this bus to a value greater than 7.'
4:
Bounds: x1=60, y1=55, x2=365, y2=80
Type: -120
Info: 'ÑÑÑ This choice can result in loss of data ÑÑÑ'
5:
Bounds: x1=30, y1=80, x2=410, y2=135
Type: -120
Info: 'Any ╘fast╒ but not wide devices will be inaccessible. You must also be sure that no other device uses the ID number selected or a collision will result.'
DITL_154.txt
Items: (6 entries)
0:
Bounds: x1=300, y1=130, x2=360, y2=150
Type: 4
Info: 'Cancel'
1:
Bounds: x1=220, y1=130, x2=284, y2=150
Type: 4
Info: 'OK'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
3:
Bounds: x1=65, y1=10, x2=350, y2=50
Type: -120
Info: 'You have changed the initiator ID of this bus to a value other than 7.'
4:
Bounds: x1=45, y1=55, x2=350, y2=80
Type: -120
Info: 'ÑÑÑ This choice can result in loss of data ÑÑÑ'
5:
Bounds: x1=30, y1=80, x2=355, y2=120
Type: -120
Info: 'You must be sure that no other device uses the ID number selected or a collision will result.'
DITL_153_Annunciator.txt
Items: (7 entries)
0:
Bounds: x1=100, y1=15, x2=500, y2=35
Type: -120
Info: ''
1:
Bounds: x1=100, y1=35, x2=500, y2=55
Type: -120
Info: ''
2:
Bounds: x1=100, y1=56, x2=500, y2=76
Type: -120
Info: ''
3:
Bounds: x1=100, y1=82, x2=500, y2=125
Type: -120
Info: ''
4:
Bounds: x1=10, y1=15, x2=70, y2=35
Type: -120
Info: 'Last:'
5:
Bounds: x1=10, y1=35, x2=70, y2=55
Type: -120
Info: 'Current:'
6:
Bounds: x1=10, y1=55, x2=70, y2=75
Type: -120
Info: 'Error:'
DITL_152_Termination Options Dual DF60 (2).txt
Items: (22 entries)
0:
Bounds: x1=435, y1=205, x2=503, y2=225
Type: 4
Info: 'OK'
1:
Bounds: x1=435, y1=170, x2=499, y2=190
Type: 4
Info: 'Cancel'
2:
Bounds: x1=85, y1=115, x2=215, y2=130
Type: -120
Info: 'Wide device detected'
3:
Bounds: x1=65, y1=100, x2=235, y2=115
Type: -120
Info: 'Internal Wide Connector (2)'
4:
Bounds: x1=16609, y1=100, x2=16754, y2=115
Type: -120
Info: 'Internal Fast Connector'
5:
Bounds: x1=150, y1=150, x2=286, y2=230
Type: 64
Info: ' '
6:
Bounds: x1=16609, y1=115, x2=16729, y2=130
Type: -120
Info: 'Fast device detected'
7:
Bounds: x1=20, y1=190, x2=145, y2=205
Type: -120
Info: 'Wide device detected'
8:
Bounds: x1=343, y1=175, x2=368, y2=205
Type: -128
Info: ''
9:
Bounds: x1=303, y1=175, x2=328, y2=205
Type: 0
Info: ''
10:
Bounds: x1=296, y1=160, x2=336, y2=175
Type: -120
Info: 'Upper'
11:
Bounds: x1=340, y1=160, x2=380, y2=175
Type: -120
Info: 'Lower'
12:
Bounds: x1=60, y1=240, x2=515, y2=330
Type: -128
Info: ''
13:
Bounds: x1=15, y1=240, x2=49, y2=272
Type: -96
Info: ' '
14:
Bounds: x1=390, y1=0, x2=529, y2=140
Type: 64
Info: ' '
15:
Bounds: x1=10, y1=175, x2=150, y2=190
Type: -120
Info: 'External Connector (2)'
16:
Bounds: x1=45, y1=25, x2=360, y2=80
Type: -120
Info: 'The PCI JackHammer¬ Dual Ultra Diff uses cable sensing to provide correct automatic termination for most situations. Select the appropriate connections below to customize termination.'
17:
Bounds: x1=80, y1=205, x2=140, y2=221
Type: 7
Info: ' ü'
18:
Bounds: x1=150, y1=130, x2=210, y2=146
Type: 7
Info: ' é'
19:
Bounds: x1=16609, y1=130, x2=16669, y2=146
Type: 7
Info: ' â'
20:
Bounds: x1=16444, y1=220, x2=16794, y2=235
Type: 7
Info: ' ë'
21:
Bounds: x1=300, y1=205, x2=380, y2=220
Type: -120
Info: 'Termination'
DITL_151_Termination Options UMax.txt
Items: (22 entries)
0:
Bounds: x1=435, y1=205, x2=503, y2=225
Type: 4
Info: 'OK'
1:
Bounds: x1=435, y1=170, x2=499, y2=190
Type: 4
Info: 'Cancel'
2:
Bounds: x1=90, y1=85, x2=220, y2=100
Type: -120
Info: 'Wide device detected'
3:
Bounds: x1=70, y1=70, x2=215, y2=85
Type: -120
Info: 'Internal Wide Connector'
4:
Bounds: x1=16614, y1=95, x2=16759, y2=110
Type: -120
Info: 'Internal Fast Connector'
5:
Bounds: x1=150, y1=130, x2=286, y2=210
Type: 64
Info: ' '
6:
Bounds: x1=16614, y1=110, x2=16734, y2=125
Type: -120
Info: 'Fast device detected'
7:
Bounds: x1=25, y1=155, x2=150, y2=170
Type: -120
Info: 'Wide device detected'
8:
Bounds: x1=343, y1=155, x2=368, y2=185
Type: -128
Info: ''
9:
Bounds: x1=303, y1=155, x2=328, y2=185
Type: 0
Info: ''
10:
Bounds: x1=296, y1=140, x2=336, y2=155
Type: -120
Info: 'Upper'
11:
Bounds: x1=340, y1=140, x2=380, y2=155
Type: -120
Info: 'Lower'
12:
Bounds: x1=60, y1=240, x2=515, y2=330
Type: -128
Info: ''
13:
Bounds: x1=15, y1=240, x2=49, y2=272
Type: -96
Info: ' '
14:
Bounds: x1=390, y1=0, x2=529, y2=140
Type: 64
Info: ' '
15:
Bounds: x1=35, y1=140, x2=155, y2=155
Type: -120
Info: 'External Connector'
16:
Bounds: x1=45, y1=5, x2=360, y2=60
Type: -120
Info: 'The SuperMac 2000Sxy uses cable sensing to provide correct automatic termination for most situations. Select the appropriate connections below to customize termination.'
17:
Bounds: x1=85, y1=170, x2=145, y2=186
Type: 7
Info: ' ü'
18:
Bounds: x1=150, y1=100, x2=210, y2=116
Type: 7
Info: ' é'
19:
Bounds: x1=16614, y1=125, x2=16674, y2=141
Type: 7
Info: ' â'
20:
Bounds: x1=60, y1=220, x2=410, y2=235
Type: 7
Info: ' ë'
21:
Bounds: x1=300, y1=185, x2=380, y2=200
Type: -120
Info: 'Termination'
DITL_150_Termination Options UMax.txt
Items: (22 entries)
0:
Bounds: x1=435, y1=205, x2=503, y2=225
Type: 4
Info: 'OK'
1:
Bounds: x1=435, y1=170, x2=499, y2=190
Type: 4
Info: 'Cancel'
2:
Bounds: x1=90, y1=85, x2=220, y2=100
Type: -120
Info: 'Wide device detected'
3:
Bounds: x1=70, y1=70, x2=215, y2=85
Type: -120
Info: 'Internal Wide Connector'
4:
Bounds: x1=16614, y1=95, x2=16759, y2=110
Type: -120
Info: 'Internal Fast Connector'
5:
Bounds: x1=150, y1=130, x2=286, y2=210
Type: 64
Info: ' '
6:
Bounds: x1=16614, y1=110, x2=16734, y2=125
Type: -120
Info: 'Fast device detected'
7:
Bounds: x1=25, y1=155, x2=150, y2=170
Type: -120
Info: 'Wide device detected'
8:
Bounds: x1=343, y1=155, x2=368, y2=185
Type: -128
Info: ''
9:
Bounds: x1=303, y1=155, x2=328, y2=185
Type: 0
Info: ''
10:
Bounds: x1=296, y1=140, x2=336, y2=155
Type: -120
Info: 'Upper'
11:
Bounds: x1=340, y1=140, x2=380, y2=155
Type: -120
Info: 'Lower'
12:
Bounds: x1=60, y1=240, x2=515, y2=330
Type: -128
Info: ''
13:
Bounds: x1=15, y1=240, x2=49, y2=272
Type: -96
Info: ' '
14:
Bounds: x1=390, y1=0, x2=529, y2=140
Type: 64
Info: ' '
15:
Bounds: x1=35, y1=140, x2=155, y2=155
Type: -120
Info: 'External Connector'
16:
Bounds: x1=45, y1=5, x2=360, y2=60
Type: -120
Info: 'The SuperMac E100 uses cable sensing to provide correct automatic termination for most situations. Select the appropriate connections below to customize termination.'
17:
Bounds: x1=85, y1=170, x2=145, y2=186
Type: 7
Info: ' ü'
18:
Bounds: x1=150, y1=100, x2=210, y2=116
Type: 7
Info: ' é'
19:
Bounds: x1=16614, y1=125, x2=16674, y2=141
Type: 7
Info: ' â'
20:
Bounds: x1=60, y1=220, x2=410, y2=235
Type: 7
Info: ' ë'
21:
Bounds: x1=300, y1=185, x2=380, y2=200
Type: -120
Info: 'Termination'
DITL_149.txt
Items: (4 entries)
0:
Bounds: x1=315, y1=155, x2=383, y2=175
Type: 4
Info: 'OK'
1:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
2:
Bounds: x1=65, y1=10, x2=390, y2=100
Type: -120
Info: 'The JackHammer¬ in PCI slot ^1, which uses a Differential interface, was correctly connected at startup, but now appears to have a Single-Ended (traditional) SCSI device connected to it.'
3:
Bounds: x1=65, y1=100, x2=390, y2=135
Type: -120
Info: 'No operation is possible until this problem is corrected.'
DITL_148.txt
Items: (3 entries)
0:
Bounds: x1=315, y1=120, x2=383, y2=140
Type: 4
Info: 'OK'
1:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
2:
Bounds: x1=65, y1=10, x2=390, y2=100
Type: -120
Info: 'The JackHammer¬ in PCI slot ^1, which uses a Differential interface, was disabled at startup because it appeared to have a Single-Ended (traditional) SCSI device connected to it.This problem has since been corrected.'
DITL_147.txt
Items: (3 entries)
0:
Bounds: x1=315, y1=120, x2=383, y2=140
Type: 4
Info: 'OK'
1:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
2:
Bounds: x1=65, y1=10, x2=390, y2=105
Type: -120
Info: 'The JackHammer¬ in PCI slot ^1, which uses a Differential interface, has been disabled because it appears to have a Single-Ended (traditional) SCSI device connected to it.No operation is possible until this problem is corrected.'
DITL_146_Termination Options Dual DF60 (1).txt
Items: (22 entries)
0:
Bounds: x1=435, y1=205, x2=503, y2=225
Type: 4
Info: 'OK'
1:
Bounds: x1=435, y1=170, x2=499, y2=190
Type: 4
Info: 'Cancel'
2:
Bounds: x1=160, y1=115, x2=290, y2=130
Type: -120
Info: 'Wide device detected'
3:
Bounds: x1=115, y1=100, x2=290, y2=115
Type: -120
Info: 'Internal Wide Connector (1)'
4:
Bounds: x1=16609, y1=100, x2=16754, y2=115
Type: -120
Info: 'Internal Fast Connector'
5:
Bounds: x1=150, y1=150, x2=286, y2=230
Type: 64
Info: '
'
6:
Bounds: x1=16609, y1=115, x2=16729, y2=130
Type: -120
Info: 'Fast device detected'
7:
Bounds: x1=25, y1=150, x2=150, y2=165
Type: -120
Info: 'Wide device detected'
8:
Bounds: x1=343, y1=175, x2=368, y2=205
Type: -128
Info: ''
9:
Bounds: x1=303, y1=175, x2=328, y2=205
Type: 0
Info: ''
10:
Bounds: x1=296, y1=160, x2=336, y2=175
Type: -120
Info: 'Upper'
11:
Bounds: x1=340, y1=160, x2=380, y2=175
Type: -120
Info: 'Lower'
12:
Bounds: x1=60, y1=240, x2=515, y2=330
Type: -128
Info: ''
13:
Bounds: x1=15, y1=240, x2=49, y2=272
Type: -96
Info: ' '
14:
Bounds: x1=390, y1=0, x2=529, y2=140
Type: 64
Info: ' '
15:
Bounds: x1=20, y1=135, x2=160, y2=150
Type: -120
Info: 'External Connector (1)'
16:
Bounds: x1=45, y1=25, x2=360, y2=80
Type: -120
Info: 'The PCI JackHammer¬ Dual Ultra Diff uses cable sensing to provide correct automatic termination for most situations. Select the appropriate connections below to customize termination.'
17:
Bounds: x1=85, y1=165, x2=145, y2=181
Type: 7
Info: ' ü'
18:
Bounds: x1=225, y1=130, x2=285, y2=146
Type: 7
Info: ' é'
19:
Bounds: x1=16609, y1=130, x2=16669, y2=146
Type: 7
Info: ' â'
20:
Bounds: x1=16444, y1=220, x2=16794, y2=235
Type: 7
Info: ' ë'
21:
Bounds: x1=300, y1=205, x2=380, y2=220
Type: -120
Info: 'Termination'
DITL_145_Termination Options DF60.txt
Items: (22 entries)
0:
Bounds: x1=435, y1=205, x2=503, y2=225
Type: 4
Info: 'OK'
1:
Bounds: x1=435, y1=170, x2=499, y2=190
Type: 4
Info: 'Cancel'
2:
Bounds: x1=85, y1=115, x2=215, y2=130
Type: -120
Info: 'Wide device detected'
3:
Bounds: x1=65, y1=100, x2=210, y2=115
Type: -120
Info: 'Internal Wide Connector'
4:
Bounds: x1=16609, y1=100, x2=16754, y2=115
Type: -120
Info: 'Internal Fast Connector'
5:
Bounds: x1=150, y1=150, x2=286, y2=230
Type: 64
Info: ' '
6:
Bounds: x1=16609, y1=115, x2=16729, y2=130
Type: -120
Info: 'Fast device detected'
7:
Bounds: x1=25, y1=175, x2=150, y2=190
Type: -120
Info: 'Wide device detected'
8:
Bounds: x1=16727, y1=175, x2=16752, y2=205
Type: -128
Info: ''
9:
Bounds: x1=303, y1=175, x2=370, y2=205
Type: 0
Info: ''
10:
Bounds: x1=301, y1=160, x2=375, y2=175
Type: -120
Info: 'Differential'
11:
Bounds: x1=16724, y1=160, x2=16764, y2=175
Type: -120
Info: 'Lower'
12:
Bounds: x1=60, y1=240, x2=515, y2=330
Type: -128
Info: ''
13:
Bounds: x1=15, y1=240, x2=49, y2=272
Type: -96
Info: ' '
14:
Bounds: x1=390, y1=0, x2=529, y2=140
Type: 64
Info: ' '
15:
Bounds: x1=35, y1=160, x2=155, y2=175
Type: -120
Info: 'External Connector'
16:
Bounds: x1=45, y1=25, x2=360, y2=80
Type: -120
Info: 'The PCI JackHammer¬ Ultra Diff uses cable sensing to provide correct automatic termination for most situations. Select the appropriate connections below to customize termination.'
17:
Bounds: x1=85, y1=190, x2=145, y2=206
Type: 7
Info: ' ç'
18:
Bounds: x1=150, y1=130, x2=210, y2=146
Type: 7
Info: ' ê'
19:
Bounds: x1=16609, y1=130, x2=16669, y2=146
Type: 7
Info: ' â'
20:
Bounds: x1=16444, y1=220, x2=16794, y2=235
Type: 7
Info: ' ë'
21:
Bounds: x1=300, y1=205, x2=380, y2=220
Type: -120
Info: 'Termination'
DITL_144_Test Window.txt
Items: (8 entries)
0:
Bounds: x1=310, y1=245, x2=374, y2=265
Type: 4
Info: 'Cancel'
1:
Bounds: x1=10, y1=10, x2=320, y2=55
Type: -120
Info: 'Since the JackHammer¬ PCI Card in slot ^1 was not active, it is being tested to insure functionality.The test can be canceled by clicking the button.'
2:
Bounds: x1=15, y1=65, x2=195, y2=80
Type: -120
Info: 'Last Test Completed:'
3:
Bounds: x1=15, y1=125, x2=110, y2=140
Type: -120
Info: 'Current Test:'
4:
Bounds: x1=15, y1=190, x2=70, y2=205
Type: -120
Info: 'Status:'
5:
Bounds: x1=70, y1=80, x2=315, y2=125
Type: -120
Info: 'No previous test'
6:
Bounds: x1=70, y1=140, x2=315, y2=185
Type: -120
Info: 'No test active'
7:
Bounds: x1=30, y1=205, x2=280, y2=260
Type: -120
Info: ''
DITL_143_More than two cables.txt
Items: (4 entries)
0:
Bounds: x1=315, y1=115, x2=383, y2=135
Type: 4
Info: 'OK'
1:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
2:
Bounds: x1=65, y1=10, x2=390, y2=80
Type: -120
Info: 'The JackHammer¬ in PCI slot ^1 appeared to have more than two cables connected to it due to Custom Termination settings.Automatic Termination mode has been set.'
3:
Bounds: x1=65, y1=85, x2=395, y2=110
Type: -120
Info: 'You may want to update the custom settings.'
DITL_142_Disable - more than two cables.txt
Items: (4 entries)
0:
Bounds: x1=315, y1=130, x2=383, y2=150
Type: 4
Info: 'OK'
1:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
2:
Bounds: x1=65, y1=10, x2=390, y2=100
Type: -120
Info: 'The JackHammer¬ in PCI slot ^1 was disabled to avoid loss of data because more than two cables appeared to be connected to it at startup due to Custom Termination settings.Automatic Termination mode has been set.'
3:
Bounds: x1=65, y1=100, x2=395, y2=125
Type: -120
Info: 'Restart the computer to use this JackHammer¬.'
DITL_141.txt
Items: (4 entries)
0:
Bounds: x1=315, y1=150, x2=383, y2=170
Type: 4
Info: 'OK'
1:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
2:
Bounds: x1=65, y1=10, x2=390, y2=80
Type: -120
Info: 'The JackHammer¬ in PCI slot ^1 now has more that two cables connected to it.This makes it impossible to correctly terminate the SCSI bus.'
3:
Bounds: x1=65, y1=80, x2=385, y2=135
Type: -120
Info: ' ÑÑÑ Loss of Data is Likely ÑÑÑShut down the computer, remove the extra cable, then restart to use this JackHammer¬.'
DITL_140.txt
Items: (4 entries)
0:
Bounds: x1=315, y1=120, x2=383, y2=140
Type: 4
Info: 'OK'
1:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
2:
Bounds: x1=65, y1=10, x2=390, y2=80
Type: -120
Info: 'The JackHammer¬ in PCI slot ^1 was disabled to avoid loss of data because more than two cables were connected to it at startup.This problem has since been corrected.'
3:
Bounds: x1=65, y1=85, x2=395, y2=110
Type: -120
Info: 'Restart the computer to use this JackHammer¬.'
DITL_139.txt
Items: (3 entries)
0:
Bounds: x1=305, y1=125, x2=373, y2=145
Type: 4
Info: 'OK'
1:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
2:
Bounds: x1=70, y1=15, x2=370, y2=120
Type: -120
Info: 'The JackHammer¬ in PCI slot ^1 has been configured to use non-standard termination.To change to automatic termination, select the Automatic option from the Termination popup menu.'
DITL_138.txt
Items: (4 entries)
0:
Bounds: x1=315, y1=165, x2=383, y2=185
Type: 4
Info: 'OK'
1:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
2:
Bounds: x1=65, y1=10, x2=390, y2=95
Type: -120
Info: 'The JackHammer¬ in PCI slot ^1 has been disabled to avoid loss of data because more than two cables are connected to it.This makes it impossible to correctly terminate the SCSI bus.'
3:
Bounds: x1=65, y1=105, x2=385, y2=145
Type: -120
Info: 'Shut down the computer, remove the extra cable, then restart to use this JackHammer¬.'
DITL_137.txt
Items: (6 entries)
0:
Bounds: x1=290, y1=130, x2=368, y2=150
Type: 4
Info: 'Automatic'
1:
Bounds: x1=210, y1=130, x2=274, y2=150
Type: 4
Info: 'Forced'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
3:
Bounds: x1=65, y1=10, x2=350, y2=50
Type: -120
Info: 'You have changed your termination settings to disable Automatic Termination.'
4:
Bounds: x1=45, y1=55, x2=350, y2=80
Type: -120
Info: 'ÑÑÑ This choice can result in loss of data ÑÑÑ'
5:
Bounds: x1=30, y1=80, x2=355, y2=120
Type: -120
Info: 'The JackHammer¬ will be disabled at startup if an illegal cable configuration is detected.'
DITL_136.txt
Items: (3 entries)
0:
Bounds: x1=292, y1=76, x2=360, y2=96
Type: 4
Info: 'OK'
1:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
2:
Bounds: x1=65, y1=10, x2=350, y2=50
Type: -120
Info: 'You have changed your termination settings to select Automatic Termination.'
DITL_135_Termination Options SE40.txt
Items: (22 entries)
0:
Bounds: x1=435, y1=205, x2=503, y2=225
Type: 4
Info: 'OK'
1:
Bounds: x1=435, y1=170, x2=499, y2=190
Type: 4
Info: 'Cancel'
2:
Bounds: x1=85, y1=115, x2=215, y2=130
Type: -120
Info: 'Wide device detected'
3:
Bounds: x1=65, y1=100, x2=210, y2=115
Type: -120
Info: 'Internal Wide Connector'
4:
Bounds: x1=225, y1=100, x2=370, y2=115
Type: -120
Info: 'Internal Fast Connector'
5:
Bounds: x1=150, y1=150, x2=286, y2=230
Type: 64
Info: ' '
6:
Bounds: x1=225, y1=115, x2=345, y2=130
Type: -120
Info: 'Fast device detected'
7:
Bounds: x1=25, y1=175, x2=150, y2=190
Type: -120
Info: 'Wide device detected'
8:
Bounds: x1=343, y1=175, x2=368, y2=205
Type: -128
Info: ''
9:
Bounds: x1=303, y1=175, x2=328, y2=205
Type: 0
Info: ''
10:
Bounds: x1=296, y1=160, x2=336, y2=175
Type: -120
Info: 'Upper'
11:
Bounds: x1=340, y1=160, x2=380, y2=175
Type: -120
Info: 'Lower'
12:
Bounds: x1=60, y1=240, x2=515, y2=330
Type: -128
Info: ''
13:
Bounds: x1=15, y1=240, x2=49, y2=272
Type: -96
Info: ' '
14:
Bounds: x1=390, y1=0, x2=529, y2=140
Type: 64
Info: ' '
15:
Bounds: x1=35, y1=160, x2=155, y2=175
Type: -120
Info: 'External Connector'
16:
Bounds: x1=45, y1=25, x2=360, y2=80
Type: -120
Info: 'The PCI JackHammer¬ uses cable sensing to provide correct automatic termination for most situations. Select the appropriate connections below to customize termination.'
17:
Bounds: x1=85, y1=190, x2=145, y2=206
Type: 7
Info: ' ü'
18:
Bounds: x1=150, y1=130, x2=210, y2=146
Type: 7
Info: ' é'
19:
Bounds: x1=225, y1=130, x2=285, y2=146
Type: 7
Info: ' â'
20:
Bounds: x1=16444, y1=220, x2=16794, y2=235
Type: 7
Info: ' ë'
21:
Bounds: x1=300, y1=205, x2=380, y2=220
Type: -120
Info: 'Termination'
DITL_134_Update takes effect after restart.txt
Items: (3 entries)
0:
Bounds: x1=292, y1=76, x2=360, y2=96
Type: 4
Info: 'OK'
1:
Bounds: x1=65, y1=15, x2=280, y2=70
Type: -120
Info: 'Updates to the JackHammer¬ ROM and settings will take effect at the next restart.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_133.txt
Items: (1 entries)
0:
Bounds: x1=0, y1=0, x2=270, y2=244
Type: 64
Info: ' '
DITL_132.txt
Items: (4 entries)
0:
Bounds: x1=292, y1=76, x2=360, y2=96
Type: 4
Info: 'OK'
1:
Bounds: x1=212, y1=76, x2=276, y2=96
Type: 4
Info: 'Cancel'
2:
Bounds: x1=65, y1=15, x2=340, y2=65
Type: -120
Info: 'Use available files to make this control panel stand alone?'
3:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_131.txt
Items: (3 entries)
0:
Bounds: x1=292, y1=105, x2=360, y2=125
Type: 4
Info: 'OK'
1:
Bounds: x1=65, y1=15, x2=345, y2=90
Type: -120
Info: 'The PCI JackHammer in slot ^1 has different software versions than this control panel. But the versions necessary to update it are not present.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_130.txt
Items: (4 entries)
0:
Bounds: x1=292, y1=100, x2=360, y2=120
Type: 4
Info: 'Update'
1:
Bounds: x1=212, y1=100, x2=276, y2=120
Type: 4
Info: 'Skip'
2:
Bounds: x1=65, y1=15, x2=350, y2=85
Type: 8
Info: 'The PCI JackHammer in slot ^1 has different software versions than this control panel.Update it?'
3:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_129.txt
Items: (44 entries)
0:
Bounds: x1=280, y1=292, x2=348, y2=312
Type: 4
Info: 'OK'
1:
Bounds: x1=200, y1=292, x2=264, y2=312
Type: 4
Info: 'Cancel'
2:
Bounds: x1=30, y1=100, x2=190, y2=116
Type: 5
Info: 'Simple Volumes'
3:
Bounds: x1=30, y1=132, x2=190, y2=148
Type: 5
Info: 'Array Volumes'
4:
Bounds: x1=30, y1=164, x2=190, y2=180
Type: 5
Info: 'Removable Volumes'
5:
Bounds: x1=20, y1=200, x2=136, y2=216
Type: 6
Info: 'All Device IDs'
6:
Bounds: x1=20, y1=216, x2=136, y2=232
Type: 6
Info: 'No Device IDs'
7:
Bounds: x1=20, y1=232, x2=144, y2=248
Type: 6
Info: 'Only Device IDs'
8:
Bounds: x1=20, y1=261, x2=40, y2=281
Type: 5
Info: ''
9:
Bounds: x1=40, y1=261, x2=60, y2=281
Type: 5
Info: ''
10:
Bounds: x1=60, y1=261, x2=80, y2=281
Type: 5
Info: ''
11:
Bounds: x1=80, y1=261, x2=100, y2=281
Type: 5
Info: ''
12:
Bounds: x1=100, y1=261, x2=120, y2=281
Type: 5
Info: ''
13:
Bounds: x1=120, y1=261, x2=140, y2=281
Type: 5
Info: ''
14:
Bounds: x1=140, y1=261, x2=160, y2=281
Type: 5
Info: ''
15:
Bounds: x1=160, y1=261, x2=180, y2=281
Type: 5
Info: ''
16:
Bounds: x1=180, y1=261, x2=200, y2=281
Type: 5
Info: ''
17:
Bounds: x1=200, y1=261, x2=220, y2=281
Type: 5
Info: ''
18:
Bounds: x1=220, y1=261, x2=240, y2=281
Type: 5
Info: ''
19:
Bounds: x1=240, y1=261, x2=260, y2=281
Type: 5
Info: ''
20:
Bounds: x1=260, y1=261, x2=280, y2=281
Type: 5
Info: ''
21:
Bounds: x1=280, y1=261, x2=300, y2=281
Type: 5
Info: ''
22:
Bounds: x1=300, y1=261, x2=320, y2=281
Type: 5
Info: ''
23:
Bounds: x1=320, y1=261, x2=340, y2=281
Type: 5
Info: ''
24:
Bounds: x1=21, y1=250, x2=35, y2=265
Type: -120
Info: '0'
25:
Bounds: x1=41, y1=250, x2=55, y2=265
Type: -120
Info: '1'
26:
Bounds: x1=61, y1=250, x2=75, y2=265
Type: -120
Info: '2'
27:
Bounds: x1=81, y1=250, x2=95, y2=265
Type: -120
Info: '3'
28:
Bounds: x1=101, y1=250, x2=115, y2=265
Type: -120
Info: '4'
29:
Bounds: x1=121, y1=250, x2=135, y2=265
Type: -120
Info: '5'
30:
Bounds: x1=141, y1=250, x2=155, y2=265
Type: -120
Info: '6'
31:
Bounds: x1=161, y1=250, x2=175, y2=265
Type: -120
Info: '7'
32:
Bounds: x1=181, y1=250, x2=195, y2=265
Type: -120
Info: '8'
33:
Bounds: x1=201, y1=250, x2=215, y2=265
Type: -120
Info: '9'
34:
Bounds: x1=221, y1=250, x2=240, y2=265
Type: -120
Info: '10'
35:
Bounds: x1=241, y1=250, x2=260, y2=265
Type: -120
Info: '11'
36:
Bounds: x1=261, y1=250, x2=280, y2=265
Type: -120
Info: '12'
37:
Bounds: x1=281, y1=250, x2=300, y2=265
Type: -120
Info: '13'
38:
Bounds: x1=301, y1=250, x2=320, y2=265
Type: -120
Info: '14'
39:
Bounds: x1=321, y1=250, x2=340, y2=265
Type: -120
Info: '15'
40:
Bounds: x1=192, y1=101, x2=352, y2=191
Type: -120
Info: 'You can have the PCI JackHammer¬ load special drivers Accelerated for Power Macintosh for some types of devices connected to the card in slot ^1.'
41:
Bounds: x1=150, y1=200, x2=360, y2=250
Type: -120
Info: 'You can enable loading of drivers for all device IDs, no device IDs or individual device IDs.'
42:
Bounds: x1=10, y1=10, x2=205, y2=90
Type: 64
Info: ' '
43:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: -127
Info: ' ü'
DITL_128.txt
Items: (10 entries)
0:
Bounds: x1=394, y1=204, x2=462, y2=224
Type: 4
Info: 'Done'
1:
Bounds: x1=16, y1=108, x2=364, y2=224
Type: 0
Info: ''
2:
Bounds: x1=16, y1=88, x2=88, y2=104
Type: -120
Info: 'Component'
3:
Bounds: x1=212, y1=88, x2=268, y2=104
Type: -120
Info: 'Version'
4:
Bounds: x1=300, y1=76, x2=340, y2=104
Type: -120
Info: 'Up to Date'
5:
Bounds: x1=388, y1=32, x2=468, y2=52
Type: 4
Info: 'Update'
6:
Bounds: x1=388, y1=64, x2=468, y2=84
Type: 4
Info: 'Update All'
7:
Bounds: x1=384, y1=96, x2=468, y2=188
Type: -120
Info: 'Versions of Components Stored in the ROM of the slot ^1 PCI JackHammer'